CellWell International

Where The Future Of Health Is Energy Wellness  

Pubmed Biofeedback

Click to View

Quantum Resonance Magnetic Analyzer

The human body is the aggregates of a large number of cells which are in continuous growth, development, differentiation, regeneration and apoptosis, and the cells constantly self-renew through its own division. 25 million cells are divided at one second in an adult’s body, and the body's blood cells constantly renew at the rate of about 100 million per minute. In the process of cell division and growth, those charged bodies of atomic nucleuses constituting atoms as the basic unit of cell and the electrons outside the nucleus are in constant high-speed movement and changing, thereby constantly emitting electromagnetic waves.

The electromagnetic wave signals emitted by the human body represent the specific state of the human body, and the emitted electromagnetic wave signals are different under the different conditions of the human body, such as health, sub-health, disease, etc. If we can determine these specific electromagnetic wave signals, we can determine the status of the body's life.


Quantum medicine considers that the most fundamental reason of falling sick is that the spin of electrons outside the atomic nucleus and the orbit change, thereby causing the change of atoms constituting a material, the change of small biomolecules, the change of big biomolecules, the change of all the cells and finally the change of organs. Because the electron is a charged body, when the spin of electrons outside the atomic nucleus and the orbit change, the electromagnetic wave emitted by the atoms will change.


The energy of the electromagnetic wave changes caused by the changes of the human body’s diseases and physical changes in the nutritional status is extremely weak and usually is only nano gauss to microgauss. The frequency and energy of the weak magnetic field of hair determined directly or by holding a sensor by hand compare with the resonance spectra of standard quantum of diseases and nutrition indicators set in the instrument after the frequency and energy are amplified by the instrument and processed by the computer, and then the corresponding quantum value being from negative to positive is output.

The size of the quantum value indicates the nature and extent of the disease and the nutrition levels. Finally, the test results are resolved by clinicians. For example, cancer cells are different from normal cells, and the electromagnetic waves emitted by cancer cells are also different from the electromagnetic waves emitted by normal cells. Quantum resonance testing tumor is to send the standard wave of cancer cells to the specimen. If there are cancer cells in the human body, resonance will occur, and the instrument will detect the signal.

The more the number of cancer cells is, the more intense the signal is, and the quantum value tends to the negative value. If there are no cancer cells, resonance will do not occur, and the quantum value tends to the positive value. It's similar to the principle of listening to broadcasting from the radio. There are many radio waves in the air. If you want to listen to some designated broadcasting, you can transfer the radio to the corresponding frequency, at this moment, resonance occurs, so that you can listen to this broadcasting. Quantum resonance uses this principle for testing

CellWell Dynamic Energy System therapy technology

Using the JCD CellWell Dynamic Energy System therapy technology, magnetic fields pulsing at a low-frequency penetrate the human body and supply the cell with electrical energy. This increases enzyme activity. Pulsing magnetic fields also increase ion dynamics and lead to improvement in the oxygen supply and increase the partial oxygen pressure (pO2) of the cells. The circulation in the vessels and capillaries increase and the cell is provided with energy that promotes healing.

Confirmation of observance the CE norms for Cellwell Dynamic Energy System Type: 4100-C, 4100-MW and Canadian model MW-4100 (4100-MW) Manufacture in cooperation with German and EU companies :
1. Device-technology owner and Manufacturer: JCD Technology GmbH Address : Elbchaussee 194c, 22605 Hamburg - Germany

I. The therapy equipment type Cellwell Dynamic Energy System is manufactured according to following CE regulations:  International standards IEC 60601-1  European standards for safety EN 60 601 and EN 60950-1  German standards DIN VDE 0750
 EMI conducted & radiated emission EN 55022/B  EMI Immunity EN 6100000-6-2


II. The examination and testing is according to following CE regulations: 1. EN 55011 for: a. Radio jamming voltage intensity 150 kHz – 30 MHz, Limiting value class B, b. Radio jamming radiation (emission) 30 MHz – 1 GHz, Limiting value class B, 2. IEC 1000-4-2 for immunity against noise from electrostatics discharge +/- 4kV / 8 kV, 3. IEC 1000-4-3 for immunity against electromagnetic fields 3V/m 26 – 1000 MHz, 4. IEC 1000-4-4 for immunity against quick burst – impulses +/- kV , 5. IEC 1000-4-5 for immunity against impact voltage impulse 1,2 / 50 us + / - kV, 6. IEC 1000-4-6 for immunity against performance disturbances / perturbations 3Veff 150kHz – 80 MHz, 7. IEC 1000-4-11 for immunity against voltage disturbances and short interruptions of electrical current ( breaking current ), 8. IEC 601-1 and EN 60 601 for manufacture of devices.

Measurement of generators type Cellwell Dynamic Energy System 4100 according to EMC standards was made by ESW Extel Systems Wedel , EMV-Center S3 , Wedel- Germany.

III. Production running and testing: 1.Provision of structural parts according to specification. 2.Furnishing of PCB and prepare the construction of components. First sight inspection all parts and components according to specification.
3.Setting in motion and testing against warming the complete furnished PCB before assembly in housing. 4.Assemble all components and PCB in housing.
5.Setting in motion of complete device and adjustment.
6.Examination of complete device for observance of all parameters and electrical safety.  high voltage with 2 kV  leak current  insulation resistance  protective ( earthen ) resistance  warming by full load and overload  examination for observance the limiting value
8.Second examination (and fine tuning if necessary) of all parameters after test operation.
9.Delivery on stock of JCD Technology GmbH .
10. Examination of applicators, magnetic coils, beds and wall-arms.
11.Examination according to specification and test operation for 2 hours.  Examination and measurement of the warming and the magnetic density ( mT/Gauss) on output of all serial manufactured applicators/coils. (Fine tuning if necessary)  Log of magnetic density value depend of connected applicator/coil and output parameters of generator.
12. Storage.

13.End examination and last operation test before delivery to client:  for Germany - 4 hours  for European Community - 8 hours  for another countries with current 230 V, 50/60 Hz - 12 hours
 for another countries with current 115 V, 50/60 Hz - 24 hours.
14.Packing. Measurement, examination and testing according points III-1 to III-9 is made by ES Elektronik, Hamburg.

Measure apparatus used for examination and adjustment during manufacture :

1. High voltage generator 0-10 kV (own construction )- for high voltage measure.
2. Device- tester TG 0701 – to measure leak current, insulation resistance and protective (earthen) resistance.
3. Efficiency net-serviceable measure apparatus -18V, 10 Amper, load resistance 1 Ohm, for the measurement of the protective (earthen) wire.
4. Spectral analysis apparatus Hameg HM 5010, for measurement of the noise immunity radiation, disturbance, perturbation.
5. Oscilloscope Hameg HM 705, for setting in motion and elimination of problems.
6. Frequency measure apparatus DC – 1 GHz, (own construction), for setting in motion and elimination of problems.
7. Multi-purpose (Multimeter) with 20 Amps current range, for measure and adjustment of output current.
8. Adapter for measurement of output current.
9. Regulable transformer (transformator) with current value indicator (own construction), for setting in motion.
10. Tesla/Gauss measurement apparatus MPU – List Magnetic and PU-205 – Projekt Elektronik, for measurement of magnetic fields – radiation by applicators/coils.

Hamburg, den 12.03.2017

JCD Technology GmbH

( Dipl.Ing. Johannes Drzyzga, President)

JCD Technology GmbH ID Number : HRB 30749, Hamburg JCD Technology GmbH Tax Number : Ust.ID.Nr. DE 118634929 


Return to Home Page